sci.energy.hydrogen

knews4u2chew@ wrote:
>
> HOW TO?
>
> As a guide, you need US Patent 4,936,961 ref. figure 1 to 3F.
>
> If you read something about magical frequencyis, forget that.
> It works fine with 10KHz or something else if you preferred.
> Use 50% duty cycle. BUT! the frequency will be doubled in the
> step up circuit and that's the frequency the Water-Cell will work
> with. The components must resist at least 2000V.
>
> The Water-Cell is very simple. Take a lot of stainless steel tubes
> with the inner diameter of the bigger tube 3mm bigger than the outer
> diameter of the inner tube. From now you must look at this
> Water-Cell as a capacitor with water as dilectricum.
>
> The Water-Cell and the INDUCTOR will resonate at a specific
> frequency. It's a normal RC-circuit.
>
> Now the most important: The Water-Cell/Inductor frequency and
> the doubled frequency from the generator must be exactly the
> same. A special condition exists in a L/C Circuit, when it is
> energized at a frequency at which the inductive reactance is equal
> to the capacitive reactance, XL = XC.
>
> Adjust the voltage peak level to reach a maximum hydrogen/oxygen
> producing with a minimum of current using. If you earlier make
> hydrogen with the electrolysis method with a lot of current,
> this experiment will really surprise you.
>
> For even less current you can make some experiment with a
> centertapped puls-transformer.
>

This experiment is repeated many thousands of times daily by EIS
(electrochemical impedance spectrography) researchers. With uniformly
negative results.

Forever and ever.

See /glib/ for a tutorial.

--
Many thanks,

Don Lancaster voice phone: (928)428-4073
Synergetics 3860 West First Street Box 809 Thatcher, AZ 85552
rss: http:/// email: don@

Please visit my GURU's LAIR web site at http://